
- Clover efi v2 yosemite mac os#
- Clover efi v2 yosemite install#
- Clover efi v2 yosemite drivers#
- Clover efi v2 yosemite driver#
Other kexts that you might use in the final installation can wait. You only need the kexts that allow you to boot and operate the installer. Remove EFI/CLOVER/kexts/10.6, 10.7, 10.8, 10.9, 10.10, leaving just ‘Other’Ĭopy essential kexts to the ‘Other’ directory (FakeSMC, VoodooPS2Controller). If you want to use VboxHfs-64.efi you will need to remove the disabler entry for it in ist/DisableDrivers. Note: You may have VboxHfs-64.efi there too. The resulting drivers64UEFI should look something like this: Now you have the Clover bootloader on the USB, but you still need to configure it correctly. You can find apfs.efi at /usr/standalone/i386/apfs.efi inside of “ /Applications/Install macOS High Sierra.app/Contents/SharedSupport/BaseSystem.dmg”. Without apfs.efi in drivers64UEFI, Clover will not recognize APFS boot volumes. If you’re installing High Sierra (10.13) to an SSD, keep in mind that the file system will be APFS, which requires apfs.efi in drivers64UEFI.
Clover efi v2 yosemite drivers#
Note: For Clover legacy, HFSPlus.efi is built-in (Clover legacy loads no drivers from drivers64UEFI anyway) Without it, you won’t see any HFS+ partitions, including the HFS+ partition that the OS X installer is on.
Clover efi v2 yosemite driver#
Note: AptioMemoryFix.efi instead of OsxAptioFix*.efi may allow native NVRAM to work on platforms where it typically does not.Īfter making your selections you can continue to “Install” the Clover bootloader to your USB.įinally, we need one EFI driver not included in the Clover installer, HFSPlus.efi: if you’re installing Clover legacy, check “Install Clover in the ESP”.there are also some “Optional RC Scripts” you might want to read about.selecting “Install Clover Preference Pane” is optional.select “Install RC scripts on target volume” and/or “Install all RC scripts on all other boot volumes”, but not for USB.you might want “EmuVariableUefi-64.efi”, but it would depend on whether native NVRAM works for you (most Skylake hardware has non-functional native NVRAM with OS X/macOS).Refer back to this section when you get to that stage. Installing to the HDD/SSD after installation is very similar to installing to the USB.
Clover efi v2 yosemite install#

The plist files in this guide require Clover v4359 or newer.

If you can’t get BIOS to recognize your USB for booting, try GPT instead of MBR.

NOTE: Some BIOS implementations require GPT, some require MBR (many allow both). NOTE: If you’re using Clover legacy, the USB should definitely be MBR. Initialized /dev/rdisk1s2 as a 7 GB case-insensitive HFS Plus volume with a 8192k journal
Clover efi v2 yosemite mac os#
Formatting disk1s2 as Mac OS Extended (Journaled) with name install_osx
